Medtronic iPro2 Guia do Utilizador descarregar pdf (Página 16)

14 CGMS

iPro

Continuous Glucose Recorder User Guide

Communicating with Solutions CGMS iPro

You u se So lut io ns CGMS iPro to set up a new patient and to download data from the

digital recorder. You should always refer the Solutions Software for CGMS iPro

Continuous Glucose Recorder User Guide for complete instructions. The digital recorder

and Solutions CGMS iPro must communicate during initialization and data transfer. This

section provides an overview of how the components are used for each process.

CAUTION:This procedure describes how to connect the glucose sensor to the digital

recorder. It is very important that you follow the sequence provided by Solutions

CGMS iPro when setting up the device. Solutions CGMS iPro will indicate when to

connect the devices. See your Solutions Software for CGMS iPro Continuous Glucose

Recorder User Guide for more details.

Setting up the digital recorder

1. Enter the digital recorder serial number into the

Solutions software. The serial number is on the flat

side of the digital recorder, as shown on the right.

Enter only the seven numbers, not the letters, when

setting up a new patient.

Connecting the glucose sensor

CAUTION: Do not connect the digital recorder to the

glucose sensor until you are prompted to do so by

Solutions CGMS iPro.

1. It is recommended that the digital recorder be fully charged before connecting it to the

glucose sensor. If it is not fully charged, it may not flash when connected to the sensor

and may not operate the sensor for the entire three days.

2. First insert the glucose sensor (follow the instructions provided with the glucose

sensor). Check for bleeding. Make sure that bleeding has stopped (see Warnings on

page 5 for details). Do not connect the digital recorder at this time.

3. The glucose sensor must be inserted in the patient’s body for at least five minutes

before connecting the digital recorder.

4. When prompted by the Solutions software, connect the digital recorder to a glucose

sensor already inserted into the body. The digital recorder will not work if connected to

a dry sensor (not inserted).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sem comentários

Medtronic iPro2 Guia do Utilizador Página 16