Medtronic Revel Guia do Utilizador descarregar pdf (Página 125)

Turning on the Glucose Alerts

The Glucose alerts must be turned on if you want the system to send you an alert when the sensor glucose

measurements reach or exceed your Glucose Limits. For a Low sensor glucose alert, the pump plays four

consecutive tones, in falling pitch, if an audible beep has been selected as the alert type. For a High

sensor glucose alert, the pump plays four consecutive tones, in rising pitch, if an audible beep has been

selected as the alert type.

1 Make sure the EDIT SETTINGS screen is open.

Main > Sensor > Edit Settings

2 Select Glucose Alerts, then press ACT. The GLUCOSE ALERTS screen appears.

Select On, then press ACT. The EDIT SETTINGS screen appears showing the glucose alerts are now

turned On.

Setting the Glucose Limits

If you turned the Glucose alerts On, then you need to set the high and low Glucose Limits recommended

by your healthcare professional. Your recommended glucose limits may vary throughout the day, so your

pump allows you to set up to eight pairs.

A Glucose Limit pair includes one High Glucose Limit and one Low Glucose Limit, as shown in the following

table:

Glucose Limit pair Alerts

Low: 80 mg/dL (4.4 mmol/L) for

523/723

90 mg/dL (5.0 mmol/L) for

523K/723K

A Low Glucose Limit alert occurs when the sensor glucose

measurement reaches or goes below the Low Glucose Limit in

this table.

High: 240 mg/dL (13.3 mmol/L) for

523/723

280 mg/dL (15.5 mmol/L) for

523K/723K

A High Glucose Limit alert occurs when the sensor glucose

measurement reaches or goes above the High Glucose Limit in

this table.

Sensor features104

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 264 265

Sem comentários

Medtronic Revel Guia do Utilizador Página 125