Medtronic Revel Guia do Utilizador descarregar pdf (Página 92)

9 Press ACT. The SET START TIME 3 screen appears. The second insulin sensitivity is now set.

10 If you do not need to set up any more insulin sensitivities, press ESC. If you need to set up more

insulin sensitivities, repeat steps 6 through 9 above for each insulin sensitivity.

You are now ready to set up the BG Target.

Setting the BG Targets

The BG Target setting allows you to set glucose targets. The Bolus Wizard will use these targets to

calculate a correction dose. Because the targets may vary throughout the day, your pump allows you to

set up to eight BG Targets each day. If you want to set just one target value, instead of a range, set both

the low and high values to the same number.

If your current BG is above the BG Target range, the Bolus Wizard feature may calculate a correction dose.

The correction dose will deliver enough insulin to bring your BG down to your current high end of the BG

Target range. If your current BG is below the BG Target range, the Bolus Wizard may calculate a negative

correction and subtract it from your food bolus. This will bring your BG to the low end of the BG Target

range.

Example:

Glucose Concentration

22.2

13.9

5.6

3.8

400

250

100

mmol/L mg/dL

Correct down to the upper

limit of 100 mg/dL

Correct up to the lower limit

of 70 mgl/dL

Target Range

Pumps are sent from the factory with default BG Target range of 100–100 mg/dL (5.6–5.6 mmol/L).

1 Make sure the EDIT SETTINGS screen is open.

Using the Bolus Wizard feature 71

Chapter 5

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 264 265

Sem comentários

Medtronic Revel Guia do Utilizador Página 92