Medtronic Revel Guia do Utilizador descarregar pdf (Página 185)

SENSOR ERROR

Reason: The sensor signals are either too high or too low.

Action: You do not need to change the sensor. Clear the alert. If the alert persists, test your transmitter

with the tester.

Alarms

Your pump has a sophisticated network of safety checks and systems. If the safety network detects

anything unusual, your pump notifies you of conditions that require your immediate attention. The

backlight illuminates the pump screen and the alarm message displays on the screen.

It is important that you understand how your pump behaves when you do not clear an alarm or an alert.

See the Alerts section in this chapter for an explanation and an example.

Check your pump and test your blood sugar. Follow the guidelines prescribed by your healthcare

professional to manage your diabetes as needed.

NOTE: The STATUS screen shows any alarms and alerts that are active.

Question: Why are alarms important?

Answer: Your pump monitors activities and notifies you if there is an unusual pump status or your

attention is required. When an alarm is active, INSULIN DELIVERY IS STOPPED and immediate operator

interaction is required.

If the vibrate mode is on, all alarms and alerts start as vibrations and

then change to beeps. For your safety, if there is no response after

10 minutes, the beeps change to a siren. The siren continues every

minute until the alarm is cleared.

When a solid circle appears, follow

the instructions on the screen

Troubleshooting, alerts and alarms164

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 264 265

Sem comentários

Medtronic Revel Guia do Utilizador Página 185