Medtronic Revel Guia do Utilizador descarregar pdf (Página 74)

5 While still holding the plunger rod, flip the vial over so the vial is on top, slowly pull down on the

plunger to fill the reservoir.

6 Gently tap the side of the reservoir to make any air bubbles rise to the top of the reservoir.

7 Slowly push up on the plunger just enough to remove any air bubbles from the reservoir.

8 Slowly pull down on the plunger to fill the reservoir to the number of units desired.

9 To avoid getting liquid on the top of the reservoir, flip the vial over so that it is upright. Turn the

reservoir counter-clockwise, then pull straight up to remove the reservoir from the transfer guard.

10 Place the tubing connector onto the reservoir. Turn the connector clockwise, pressing gently against

the reservoir until you feel it slide in. Push in and continue turning until the reservoir and the

connector lock with a click.

11 Tap the side of the reservoir to remove any air bubbles.

12 To purge air bubbles that have risen to the top of the reservoir, push up on the plunger until you see

insulin in the tubing.

13 Without pulling, turn the plunger counter-clockwise to remove it from the reservoir.

Starting on insulin 53

Chapter 4

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 264 265

Sem comentários

Medtronic Revel Guia do Utilizador Página 74