Medtronic Revel Guia do Utilizador descarregar pdf (Página 163)

Contact our 24 Hour HelpLine if any of the tests do not occur as described here.

NOTE: If the pump detects a condition such as low battery, the selftest will not finish. A message will

appear to show the condition that caused the test to stop.

1 Go to the UTILITIES MENU.

Main > Utilities > Selftest

2 Select Selftest, then press ACT.

3 Periodically, you will hear beeps as different mechanisms in the pump are being tested. As part of the

selftest, the pump will do these tests:

a. Screen Test:

The screen will appear all black.

b. Selftest:

The pump will count down from 10.

c. Tone Test:

You should hear beeps.

d. Vibrate Test:

You will feel vibrations.

4 After the selftest is finished, TEST COMPLETE screen appears. The screen will return to the UTILITIES

MENU, then to the HOME screen.

User settings

The user settings function allows you to save, restore, and clear all pump settings. You can also view a

listing of the dates and times of all recent user settings operations you have done. The Save Settings

feature lets you keep a set of pump settings that you can restore to your pump if it is cleared or you need

to go back to these settings for any reason.

When you clear your pump, the pump settings are restored to the factory defaults, and you must either

use Restore Settings, if you have saved a set of pump settings, or reprogram all your settings before you

can use your pump again. The pump does not clear the internal pump memory.

WARNING: Do not clear your pump settings while it is connected to your body.

Utilities142

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 264 265

Sem comentários

Medtronic Revel Guia do Utilizador Página 163